Fluke 123 - Page 42

Fluke 123/124
Users Manual
34
Deleting Screens and Associated Setups
To delete all or just 1 screen + setups, do the following:
c Open the SAVE/PRINT menu.
If you want to clear all memory locations, press F3
DELETE ALL. If you want to clear just 1 memory location
(e.g. memory 7), do the following:
d Highlight DELETE ...
e Open the DELETE ... submenu.
Filled memory locations are
indicated with a closed square.
f Highlight memory 7.
Observe that the settings and
date/time of creation of the
waveform in memory 7 are
displayed now.
g The contents of memory 7 are
deleted and the instrument
returns to normal signal
acquisition.