1507/1503
Users Manual
18
Testing the Fuse
XWWarning
To avoid electrical shock or injury, remove
the test leads and any input signals before
replacing the fuse.
Test the fuse as described below and shown in Figure 10.
Replace the fuse as shown in Figure 11.
1. Turn the rotary switch to the O position.
2. Press and hold T. If the display reading is FUSE,
the fuse is bad and should be replaced.
INSULATION TESTER
1507
315 mA
Fuse
OK
bbw06f.eps
Figure 10. Testing the Fuse
To Next Page
Loading...
