Fluke 1523 - Page 68

61
Digital Communication Interface
Serial Commands - Alphabetic Listing
Example: LOG:AUT:PRIN 5
Response:
DATA_25,1,22.676,C,15:19:42.0,2000-05-24
DATA_25,2,9.960,KO,15:19:44.0,2000-05-24
DATA_25,1,23.220,C,15:19:46.0,2000-05-24
DATA_25,2,23.245,C,15:19:48.0,2000-05-24
DATA_25,1,22.765,C,15:19:50.0,2000-05-24
DATA_25,2,9.962,KO,15:19:52.0,2000-05-24
DATA_25,1,23.087,C,15:19:54.0,2000-05-24
DATA_25,2,23.260,C,15:19:56.0,2000-05-24
LOGging:AUTomatic:STATus?
Return the Auto-Log status for a preselected tag number
Returns a 0 if an Auto-Log session is not running, or a 1 if an Auto-Log session is
running.
The tag number addressed must have been previously selected with the
LOG:AUT:LAB command.
Error ‘-221,”Settings conict”’ is queued if the data logging storage is corrupt, or if no
tag is selected with LOG:AUT:LAB.
Example: LOG:AUT:STAT?
Response: 0
LOGging:AUTomatic:STATus <bool>
Set the Auto-Log status for a preselected tag number
The <bool> parameter turns auto logging on if set to 1, or off if set to 0. If another tag
is presently being logged, it is automatically stopped.
The tag number addressed must have been previously selected with the
LOG:AUT:LAB command.
Error ‘-221,”Settings conict”’ is queued if the data logging storage is corrupt, if
no tag is selected with LOG:AUT:LAB, or if the LOG or any recall menu display is
active.
Example: LOG:AUT:STAT 0
LOGging:AUTomatic:TIMe?
Return the Auto-Log interval.
Returns AUTO, 1, 2, 5, 10, 30, or 60. Numeric intervals are expressed in seconds.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com