Fluke 1523 - Page 71

1523, 1524 Reference Thermometer
Serial Commands - Alphabetic Listing
64
Example: LOG:DEM:PRIN
Response:
DTEST,1,22.676,C,15:19:42,2000-05-24
DTEST,2,9.960,KO,15:19:44,2000-05-24
DTEST,1,23.220,C,15:19:46,2000-05-24
DTEST,2,23.245,C,15:19:48,2000-05-24
DTEST,1,22.765,C,15:19:52,2000-05-24
DTEST,2,9.962,KO,15:19:54,2000-05-24
DTEST,1,23.087,C,15:19:56,2000-05-24
DTEST,2,23.260,C,15:19:58,2000-05-24
LOGging:DEMand:VALue? <num>
Return the specied demand log entry.
The <num> parameter species the demand log entry to return, 1 to 25. Specifying
0 returns the rst (oldest) log entry. Specifying a value greater than the number of
logged points returns the last log entry.
The example shows the 1524 return data. A single channel, and no time and date, are
shown on the 1523 return data.
Each data line includes the default or user dened demand log description, the channel
number, the primary value and units, and on the 1524 the time and date. When both
channels are active, records for each channel alternate. When only one channel is ac-
tive, no records are sent for the inactive channel.
Error ‘-221,”Settings conict”’ is queued if the data logging storage is corrupt.
Example: LOG:DEM:VAL? 10
Response:
DTEST,1,125.820,C,15:19:46,2000-05-24
DTEST,2,23.220,C,15:19:46,2000-05-24
LOGging:DEMand:STATistic<n>? <num>
Return the specied demand log statistical or auxiliary value for the specied demand
log entry.
The STATistic sufx, <n>, species the demand log statistical type number as listed in
Table 23 on page 76. Defaults to 1 if omitted.
The <num> parameter species the demand log entry to return, 1 to 25. Specifying
0 returns the rst (oldest) log entry. Specifying a value greater than the number of
logged points returns the last log entry.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com