1535/1537
Users Manual
22
To view stored test data:
1. With the Tester turned on, push
I to view stored records.
2. Push
J K to select Record.
3. Push
L M to view the record detail.
Note
When a voltage is present at the terminals, that voltage is always
shown on the top-center of the display, regardless of whether that
voltage is sourced by the Tester or is from the circuit under test. See
Ta bl e 7 .
4. Push
J or K to step through the stored locations.
5. Stop at the location you want to view.
6. Push
L or M to view the stored test data for a specific test. Test data
appears on the alphanumeric text display and on the LCD.
Table 7. View Stored Results
Item Description
A
Terminal voltage
B
Stored record label (tag)
C
Stored test results
To Next Page
Loading...
