27 II/28 II
Users Manual
8
Table 4. Pushbuttons
Button
Switch
Position
Function
Selects capacitance
Selects temperature (28 II only)
Selects ac low-pass filter function (28 II only)
Switches between dc and ac current
(Yellow)
Switches between dc and ac current
Any switch
position
Switches between the ranges available for the selected function. To return to autoranging, hold
the button down for 1 second.
Switches between °C and °F. (28 II only)
Any switch
position
MIN MAX
recording
Frequency
counter
AutoHOLD (formerly TouchHold) captures the present reading on the display. When a new,
stable reading is detected, the Meter beeps and displays the new reading.
Stops and starts recording without erasing recorded values.
Stops and starts the frequency counter.
To Next Page
Loading...
