EasyManuals Logo

Fluke 28 II Ex User Manual

Fluke 28 II Ex
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
28 II Ex
Users Manual
2
Safety Information
The Product complies with:
ISA-82.02.01
CAN/CSA-C22.2 No. 61010-1-04
IEC Standard No. 61010-1:2001
Measurement Category III, 1000V, Pollution
Degree 2
Measurement Category IV, 600V, Pollution
Degree 2
Industrial use in potentially explosive areas of
zone 1, 2, 21, 22, or MI, in accordance with
ATEX requirements (ATEX 137) (see the EX
safety instructions & regulations section)
In this manual, a Warning identifies conditions and
actions that can be dangerous to the user. A Caution
identifies conditions and actions that can cause damage
to the Product or the equipment under test.
Symbols used on the Product and in this manual are
explained in Table 1.
To ensure safe operation of the Product, obey all
instructions and warnings contained in this manual.
EX Safety Information
Note
Go to www.ecom-ex.com or www.fluke.com
download the EC declaration of conformity and
Ex certificate for this product. You can also order
them from Fluke.
This manual contains information and safety regulations
that must be followed for safe, reliable operation of the
Product in hazardous areas under the described
conditions. Failure to follow the information and
instructions can have dangerous consequences, or may
contravene applicable legislation.
Please read through this manual before you start to use
the Product.
If there is a question (because of translation and/or
printing errors), refer to the English manual.

Other manuals for Fluke 28 II Ex

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 28 II Ex and is the answer not in the manual?

Fluke 28 II Ex Specifications

General IconGeneral
Diode testYes
Product typeDigital multimeter
Product colorBlack, Red
Frequency range0.0005 - 199.99 kHz
DC current range0.0000001 - 10 A
DC voltage range0.0001 - 1000 V
Resistance range0.1 - 50000000 Ω
Measuring categoryCAT IV 600V
Placement supportedHandheld multimeter
Basic accuracy (frequency)0.005%
Basic accuracy (DC current)0.2%
Basic accuracy (DC voltage)0.05%
Temperature measurement range-200 - 1090 °C
Battery typeAAA
Power sourceBattery
Battery technologyAlkaline
Number of batteries supported3
Operating altitude0 - 2000 m
Maximum storage altitude10000 m
Operating relative humidity (H-H)0 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth198.1 mm
Width100 mm
Height6.35 mm
Weight698.5 g

Related product manuals