EasyManuals Logo

Fluke 28 II Ex User Manual

Fluke 28 II Ex
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
28 II Ex
Users Manual
6
WCaution
To avoid possible damage to the Product or
to the equipment under test, follow these
guidelines:
Disconnect circuit power and discharge
all high-voltage capacitors before testing
resistance, continuity, diodes, or
capacitance.
Use the proper terminals, function, and
range for all measurements.
Before measuring current, check the
fuses in the Product. (See “Fuse Test”.)
Errors and Load Restrictions
If there is a question that the safety or integrity of this
Product is compromised, remove it from operation and
the Ex-hazardous areas immediately. Also, do whatever
is necessary to prevent Product operation by others until
the Product is examined by an ecom certified technician.
It is recommended that you send the Product to the
manufacturer to be examined.
Because the safety and reliability of the Product can be at
risk, do not operate the Product if:
Visible damage is found in the housing of the
Product.
The Product has had an excessive load put on it for
which it is not designed.
The Product was not stored correctly.
The Product has sustained damage in transit.
Illegible inscriptions or lettering shows on the
Product.
A Product malfunction occurs.
Obvious measurement inaccuracies occur.
Measurements/simulations are no longer possible
with the Product.
Permitted tolerances or threshold values were
exceeded.

Other manuals for Fluke 28 II Ex

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 28 II Ex and is the answer not in the manual?

Fluke 28 II Ex Specifications

General IconGeneral
Diode testYes
Product typeDigital multimeter
Product colorBlack, Red
Frequency range0.0005 - 199.99 kHz
DC current range0.0000001 - 10 A
DC voltage range0.0001 - 1000 V
Resistance range0.1 - 50000000 Ω
Measuring categoryCAT IV 600V
Placement supportedHandheld multimeter
Basic accuracy (frequency)0.005%
Basic accuracy (DC current)0.2%
Basic accuracy (DC voltage)0.05%
Temperature measurement range-200 - 1090 °C
Battery typeAAA
Power sourceBattery
Battery technologyAlkaline
Number of batteries supported3
Operating altitude0 - 2000 m
Maximum storage altitude10000 m
Operating relative humidity (H-H)0 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth198.1 mm
Width100 mm
Height6.35 mm
Weight698.5 g

Related product manuals