Fluke 43B User Manual

Fluke 43B
Users Manual
22
Using FlukeView Software
This section explains how to connect the Fluke 43B to a PC for use with the
FlukeView
®
Power Quality Analyzer software or to create reports in MS-Word
®
.
Use the Optically Isolated RS232 Cable on the optical port to connect the Fluke
43B to a PC (see Figure 5).
Figure 5. Connecting a Computer
Note
For information about how to install and use the FlukeView software,
please read the FlukeView SW43W Users Manual as supplied on CD-
ROM.
To create a report in MS-Word, see: “Creating Reports” in Chapter 5 of
the Applications Guide.

Fluke 43B Specifications

General

Category	Power Quality Analyzer
Interface	RS-232
Volts AC/DC	Yes
Ohms	Yes
Continuity	Yes
Diode Test	Yes
Capacitance	Yes
Harmonics Measurement	Up to 51st harmonic
Display	LCD
Battery Life	Approximately 6 hours
Weight	1.1 kg (2.4 lb)
Data Storage	Yes
Amps AC/DC	0.1 to 1000 A (with clamp)
Power Measurement	W, VA, VAR, PF
Dimensions	50 mm
Current Measurement Range	Via current clamp accessories (not built-in)