Fluke 43B User Manual

Fluke 43B
Users Manual
32
Ordering Codes
The following tables list the user-replaceable parts for the Fluke 43B. For
additional optional accessories, see the ScopeMeter Accessories booklet. To
order replacement parts or additional accessories, contact your nearest service
center.
Replaceable Parts
Item Ordering
Code
Ni-MH Battery Pack (installed) BP120MH
Power Adapter/Battery Charger:
Universal Europe 230V, 50Hz
North America 120V, 60Hz
United Kingdom 240V, 50Hz
Japan 100V, 60Hz
Australia 240V, 50Hz
Universal 115V/230V *
* At delivery PM8907/808 is set to 230V. Check the
local line voltage before connecting the adapter. If
necessary, select the corresponding line voltage
with the slide switch on the adapter. A line plug
adapter complying with the applicable National
Requirements may be provided to alter the blade
configurations for a specific country.
PM8907/801
PM8907/813
PM8907/804
PM8907/806
PM8907/807
PM8907/808
Set of two Test Leads (Red and Black)
TL24
Set of two flat blade Test Pins (Red and Black)
TP1
Set of two 4mm Test Pins (Red and Black)
TP4
Set of two Large Alligator Clips (Red and Black)
UL1244
AC85A
Set of two Industrial Alligator Clips (Red and Black)
UL1244
AC20
Clamp-on AC Current Probe
i-400s
Shielded Banana-to-BNC Adapter Plug
BB120

Fluke 43B Specifications

General

Category	Power Quality Analyzer
Interface	RS-232
Volts AC/DC	Yes
Ohms	Yes
Continuity	Yes
Diode Test	Yes
Capacitance	Yes
Harmonics Measurement	Up to 51st harmonic
Display	LCD
Battery Life	Approximately 6 hours
Weight	1.1 kg (2.4 lb)
Data Storage	Yes
Amps AC/DC	0.1 to 1000 A (with clamp)
Power Measurement	W, VA, VAR, PF
Dimensions	50 mm
Current Measurement Range	Via current clamp accessories (not built-in)