Calibrator
Features
13
The Display
A sample display is shown in Table 5. Note that this is only an example for reference. The Display
changes and allows access to different portions of the user interface, depending upon what function
the Calibrator is in.
Note
AC Power and other dual outputs are not available on the 5540A. These items are noted
throughout this manual.
Table 5. Sample Display
Number Description
A
Operate / Standby indicator.
B
Select waveform buttons. Push to open the Select Waveform. In some functions, buttons
in this location open the Select RTD or Select Thermocouple panels.
To Next Page
Loading...
