Fluke 5560A - 5560 A;5550 A;5540 A Operators Manual; Setup Menu > System Settings

5560A/5550A/5540A
Operators Manual
22
Setup Menu > System Settings
The System Settings menu (Setup Menu > System Settings) is the third choice of the list of
submenus on the left of the Setup Menu. Some of these settings require the Product passcode. See
Calibration Security Passcode. The System Settings are in Table 9.
Parameter Default Value
Telnet Netmask 255.255.255.0
Telnet Gateway 0
Telnet Static Gateway 0.0.0.0
Telnet DHCP true
In Remote false
In Lockout false
Calibrator On Time 0.0
Internal Verification Temp 0.0
User Entered Verification Temp 23.0
Table 9. System Settings
Parameter Setting Choices
Date/Time
Note
The Product needs to be unlocked to change the
date.
Date Format:
MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
Date
Time Format: 12, 24
Time
Restore Date / Time Defaults
Display Controls
The Display Controls button accesses the slide-
out menu for Screen Brightness, LED Brightness,
and a Restore Display Defaults Reset button.
Screen Brightness: 0% to 100%, LED Brightness:
0% to 100%
Remote Port Setup
USB, Ethernet, GPIB, RS-232 (See Remote Port
Setup)
Table 8. Product Default Values (cont.)