Fluke 5560A - Page 27

Calibrator
Menus
21
Parameter Default Value
RS232 EOL Char CRLF
RS232 Flow Control xon_xoff
RS232 Interface TERM
RS232 Parity none
RS232 Stop Bits SBIT1
RTD Default PT385
Tsense Type TC
TC Default K
Telnet Enabled true
Telnet Port 3490
Telnet EOL Char CRLF
Telnet Interface TERM
Temperature Scale Default ITS90
USBTMC Enabled true
Voltage Max 1020.0
Voltage Min -1020.0
Error Unit SCI
Reference Clock Default INT
Reference Phase Default 0.0
Scope Overload Limit Default 10.0
Overload Time Limit 10
Scope Option Type NONE
Scope Option Detected false
Diagnostic Fault Action HALT
Telnet MAC Address 0.0.0.0
Telnet IP Address 0.0.0.0
Telnett Static IP 0.0.0.0
Table 8. Product Default Values (cont.)