Calibrator
Contact Fluke Calibration
3
Contact Fluke Calibration
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.flukecal.com
To register your product, view, print, or download the latest manual or manual supplement, go to our
website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
info@flukecal.com
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies
conditions and procedures that can cause damage to the Product or the equipment under test.
General Safety Information is located in the printed 5560A/5550A/5540A Safety Information document
that ships with the Product. It can also be found online at www.flukecal.com
. More specific safety
information is listed in this manual where applicable.
Specifications
Safety Specifications are located in the Safety Specifications section of the 5560A/5550A/5540A
Safety Information manual. Complete specifications are at www.flukecal.com
. See the 5560A Product
Specifications,
5560A Product Specifications, or 5540A Product Specifications.
Service Information
Contact an authorized Fluke Calibration Service Center if the Product needs calibration or repair during
the warranty period. See Unpack and Inspect. Please have Product information such as the purchase
date and serial number ready when you schedule a repair.
Operation Overview
Operate the Product from the front panel in the local mode, or remotely with the IEEE-488, RS-232,
USBTMC, or LAN ports. For remote operations, see the 5560A/5550A/5540A Remote Programmers
Manual at www.flukecal.com.
Several software options are available to integrate product operation into
a wide variety of calibration requirements.
To Next Page
Loading...
