EasyManuals Logo

Fluke 719 Series User Manual

Fluke 719 Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three years (one year for pump assembly) from
the date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse or
abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
To obtain service during the warranty period, send your defective Calibrator to the nearest Fluke Authorized Service Center
with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries
do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 719 Series and is the answer not in the manual?

Fluke 719 Series Specifications

General IconGeneral
Accuracy0.025% of full scale
Current Measurement0 to 24 mA
DisplayLCD
Pressure MediaNon-corrosive gases
Pressure Unitspsi, bar, kPa
Resolution1 µA
Loop Power24V DC
Operating Temperature-10 °C to 55 °C
Storage Temperature-20 °C to 60 °C
Weight0.65 kg

Related product manuals