Fluke 719 Series User Manual

Pressure Calibrator with Electric Pump
External Fluke Pressure Module Compatibility
17
External Fluke Pressure Module
Compatibility
If inappropriate units are selected, the output of Fluke
700P Pressure Modules can cause the Calibrator display
to overflow (OL), or displays values that are too low to be
read. Refer to Table 6 for appropriate unit and range
compatibility.
Table 6. Fluke Pressure Module Compatibility
Pressure Unit Module Compatibility
psi Available on all pressure ranges
inH
2
0 All ranges through 3000 psi
cmH
2
0 All ranges through 1000 psi
bar 15 psi and above
mbar All ranges through 1000 psi
kPa Available on all pressure ranges
inHg Available on all pressure ranges
mmHg All ranges through 1000 psi
kg/cm
2
15 psi and above

Fluke 719 Series Specifications

General

Accuracy	0.025% of full scale
Current Measurement	0 to 24 mA
Display	LCD
Pressure Media	Non-corrosive gases
Pressure Units	psi, bar, kPa
Resolution	1 µA
Loop Power	24V DC
Operating Temperature	-10 °C to 55 °C
Storage Temperature	-20 °C to 60 °C
Weight	0.65 kg