Pressure Calibrator with Electric Pump
Contacting Fluke
27
General Specifications
Maximum voltage applied between either mA terminal
and earth ground or between the mA terminals: 30 V
Storage temperature: -30 °C to 60 °C
Operating temperature: -10 °C to 55 °C
Operating altitude: 3000 m maximum
Relative humidity: 95 % up to 30 °C, 75 % up to 40 °C,
45 % up to 50 °C, and 35 % up to 55 °C
Vibration: Random 2 g, 5 Hz to 500 Hz per MIL-PRF-
28800F Class 2
Shock: 1 m drop test, per IEC 61010-1
Protection Class: Pollution Degree II
Safety:
• Complies with EN/IEC61010-1 2nd ed.
• Agency Approvals: CSA-C22.2 No. 61010-1-04
Power requirements: Two 9 V batteries (ANSI/NEDA
1604A or IEC 6LR61)
Size: 60 mm H x 87 mm W x 210 mm L (2.38 in H x
3.41 in W x 8.28 in L); with holster: 66 mm H x 94 mm W
x 216 mm L (2.61 in H x 3.72 in W x 8.5 in L)
Weight with Holster: 912 g (2.00 lb)
Calibration Cycle: 6 months to 2 years based on desired
accuracy.
Contacting Fluke
To contact Fluke for product information, operating
assistance, service, or to get the location of the nearest
Fluke distributor or service center, call:
1-888-44-FLUKE (1-888-443-5853) in U.S.A
1-800-36-FLUKE in Canada
+31-402-675-200 in Europe
+81-3-3434-0181 Japan
+65-738-5655 Singapore
+1-425-446-5500 from other countries
Or visit Fluke's website at: www.fluke.com
.
Register the Calibrator at: http://register.fluke.com
.
Address correspondence to:
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090, P.O. Box 1186,
Everett, WA 98206-9090 5602 BD Eindhoven
U.S.A.
To Next Page
Loading...
Need help?
General
