Fluke 721 - Language Selection

Pressure Calibrator
Product Features
9
Table 3. Display Functions
Item
Number
Name Description

Primary
Parameters
Shows what is being
measured.

Span
Indicator
Shows the percent of the
4 mA to 20 mA span. (For
mA functions only.)

Pressure
Units
Shows one of 17 pressure
units available for display.
 Units
Shows the unit of measure
for the display.
Language Selection
The user interface is available in three languages:
• English
• Norwegian
• German
To select a language:
1. Turn the Product off.
2. Hold down , , and  simultaneously.
3. As the Product powers up, the display shows the
language in the top left corner of the display. Repeat
the procedure to show each subsequent language.
Once the necessary language is shown, the Product
user interface stays in that language until another
language is chosen.