Pressure Calibrator
Menus
11
Menus
There are 11 sub menus that can be accessed from
(Main Menu). Push to go to the next menu selection.
For the last menu, push (DONE) to return to the Main
Menu.
The 11 sub-main menus are:
• SWITCHTEST
• %ERROR
• MINMAX
• SET UNITS
• CONTRAST
• LOCK CFG
• AUTO OFF
• RESOLUTION
• HART
• PROBE TYPE
• DAMP
Push , , or , depending on the menu, to toggle
through each parameter of an active menu. The individual
menus are explained in the subsequent sections.
SWITCHTEST
To access the SWITCHTEST menu, push .
SWITCHTEST is shown on the menu bar.
Connect a pressure switch to the Product as shown in
Figure 3.
To Next Page
Loading...
