721
Users Manual
22
PROBE TYPE
To select an external RTD probe for use with the Product:
1. Push to access the menus.
2. Push to step through the menu until PROBE is
shown on the menu bar.
hix035.eps
3. Push on to select the Probe type. The probe
choices are:
• P100-385
• P100-392
• P100-JIS
4. Push to select the necessary probe type (see the
figure below). Push to store the change and go to
the Main Menu.
Note
The default probe type is PT100-385.
SELECT RTD PROBE TYPE
hix036.eps
5. Connect the RTD Probe.
To Next Page
Loading...
