Fluke 721 - SET UNITS

721
Users Manual
18
SET UNITS
Use the SET UNITS menu to select the measurement
units for each port. To use this menu:
1. Push  to access the menus.
2. Push  to step through the menu until SET UNITS is
shown on the menu bar.
3. Push  to select the necessary unit. The choices
are:
• inHg 0 °C
• mmHg 0 °C
• kg/cm
2
• mmH
2
O 4 °C
• mmH
2
O 20 °C
• ftH
2
O 60 °F
• psi
• inH
2
O 4 °C
• inH
2
O 20 °C
• inH
2
O 60 °F
• cmH
2
O 4 °C
• cmH
2
O 20 °C
• bar
• mbar
• MPa
• kPa