Fluke 8558A Service Manual

8588A/8558A
Service Manual
2
Contact Fluke Calibration
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information and download the latest manual supplements, visit Fluke Calibration’s
website at www.flukecal.com
.
To register your product, visit http://flukecal.com/register-product.
Calibration Interval and Performance
Fluke Calibration recommends that the Product be calibrated on one of 2-year, 365-day, or 90-day
intervals depending on the requirements of the applications for which the Product is used.
During manufacture, the Product is adjusted and verified with low uncertainties, reflected in the
Absolute Specifications. After recalibration, the user should apply the calibration uncertainties for the
calibration standards and for the process applicable to that calibration by combining those calibration
uncertainties with the Multimeter Relative to Standards specifications.
Required Equipment
Table 1 lists the necessary equipment to adjust Product calibration.
Table 1. Equipment for Calibration Adjustments and Performance Verification
Equipment Name Recommended Models Comment
Multifunction Calibrator Fluke Calibration 5730A
Amplifier Fluke Calibration 5725A
To increase Volt Hz
product and current range
of the Multifunction
Calibrator
Multiproduct calibrator Fluke Calibration 5522A
For voltage >1 MHz and
capacitance verification
Transconductance amplifier Fluke Calibration 52120A
For currents >11 A,
verification only
10 GΩ Standard Resistor Verification only

Fluke 8558A Specifications

General

Brand	Fluke
Model	8558A
Category	Multimeter
Language	English