Fluke DTX Series - Page 31

Certifying Twisted Pair Cabling
23
Table 2. Twisted Pair Test Settings (cont.)
Setting Description
T568A T568B
Token Ring
ATM/TP-PMD Straight
ATM/TP-PMD
Cr
ossed
Ethernet
Ethernet Crossed
3
2
1
2
3
6
3
6
1
2
white/orange
orange
white/green
green
-continued-
SETUP > Twisted
Pair > Outlet
Configuration
The Outlet Configuration setting determines which cable pairs are tested and which pair numbers
are assigned to the pairs. To see the wire map for a configuration, press J Sample from the
Outlet Configuration screen. Selecting “Custom” lets you create a configuration. See the Technical
Reference Handbook for details.
USOC (1 or 2 Pair)
1 white/green
2 green
3 white/orange
4 blue
5 white/blue
6 orange
7 white/brown
8 brown
12
3
4
1 white/orange
2 orange
3 white/green
4 blue
5 white/blue
6 green
7 white/brown
8 brown
13
2
4
3 white/orange
4 blue
5 white/blue
6 orange
12
3 white/green
4 blue
5 white/blue
6 green
13
1 white/green
2 green
7 white/brown
8 brown
1
2
2
1
1
2
7
8
7
8
1
2
white/green
green
white/brown
brown
1 white/orange
2 orange
3 white/green
6 green
3
2