Fluke DTX Series - Overview of Features

1
DTX Series CableAnalyzer
Overview of Features
The DTX Series CableAnalyzers are rugged, hand-held
instruments used to certify, troubleshoot, and document
copper and fiber cabling installations. The testers feature
the following:
• The DTX-1800 certifies twisted pair and coaxial
cabling to Class F limits (600 MHz) in less than
25
seconds and Category 6 cabling in less than
10 seconds. The DTX-1200 certifies Category 6 cabling
in less than 10 seconds. Meet Level III and Level IV
accuracy requirements.
• The DTX-LT certifies Category 6 cabling in less than
28
seconds. All models meet Level III and Level IV
accuracy requirements.
• Color display clearly indicates PASS/FAIL results.
• Automatic diagnostics report distance to and likely
causes of common faults.
• Toner feature helps you locate jacks and automatically
starts an Autotest upon tone detection.
• Optional fiber modules let you certify multimode and
singlemode fiber optic cabling.
• Optional DTX-OTDR modules let you locate and
characterize reflective and loss events in optical fibers.
• Optional DTX-NSM module lets you verify network
service.
• Optional DTX 10 Gig kit lets you test and certify Cat 6
and Augmented Cat 6 (Cat 6A) cabling for
10 Gigabit Ethernet applications.
• Stores up to 250 Cat 6 Autotest results, including
graphical data, in internal memory.