Fluke DTX Series - PASS*;FAIL* Results

DTX Series CableAnalyzer
Users Manual
30
PASS*/FAIL* Results
A result marked with an asterisk means that
measurements are in the tester’s accuracy uncertainty
range (Figure 14) and the “*” notation is required by the
selected test standard. These results are considered
marginal. Marginal passing and failing results are marked
with blue and red asterisks, respectively.
A PASS* may be considered a passing result.
A FAIL* should be considered a failure.
amd42f.eps
Figure 14. PASS* and FAIL* Results
Limi
t
PASS*
PASS
*
FAIL
*
Tester's
accuracy
uncertainty
range
FAIL
FAIL*
PASS