Fluke DTX Series - Uploading Results to a PC

DTX Series CableAnalyzer
Users Manual
56
All Models
To delete results or folders, do the following:
1 Turn the rotary switch to SPECIAL FUNCTIONS, then
select View/Delete Results.
2 If necessary, press J Change Folder to find the
results you want to delete.
3 Do one of the following:
• To delete one result, highlight it, press K Delete,
press
L Delete; then press L Yes.
• To delete all results in the current folder, the current
folder, or all results in the tester (internal memory),
press K Delete; then select an option. Press L
Delete; then press
L Yes.
Uploading Results to a PC
To upload results to a PC, do the following:
1 Install the latest version of LinkWare software on your
PC.
2 Turn on the tester.
3 Connect the tester to the PC with the USB cable
included or the DTX serial cable available from Fluke
Networks.
or
Insert the memory card containing results into the PC’s
memory card reader.
4 Start LinkWare software on the PC.
5 Click Import on the LinkWare toolbar. Select the
tester’s model from the list.
or
Select Memory card or folder on PC.
6 Select the records you want to import; then click OK.