15
Setting User Preferences
You may need to change some of the default
configuration settings so that your tester fits your
particular work environment and testing situations.
From the Main menu:
1. Select the NetTool icon
to access the NetTool
menu.
2. Select Settings to view these options:
• Feet/Meters: select the desired unit of
measurement for tests.
• Power Auto Off: select to turn the tester
off after 10 minutes of inactivity.
• NiMH Charging Enabled: select to enable
charging of NiMH batteries (when installed).
• Set Time/Set Date: Press
c
b
to change a
number; press
_ `
to move the cursor to
the next position. After the desired
time/date is displayed, press SELECT to save.
• Restore Defaults: press SELECT to restore
all of the tester’s factory default settings.
To Next Page
Loading...
