14
Main Menu
The Main menu is located under the connection
diagram. From this menu, you can select the
following:
• AutoTest: automatically analyzes the connection
at the RJ-45 jacks and displays results.
• NetProve: automatically proves Ping and
Application connectivity to servers and key
devices. Indicates pass/fail based on ping and TCP
port response times.
• Problems: displays the Problem log, which alerts
you to problems detected, such as errors, duplex
mismatches, and duplicate IP addresses.
• Key Devices: displays all key devices and
categorizes them by type (for example, servers,
routers, printers).
• Toolkit: contains a group of support tools, such
as Health, Protocols, Ping, and Reporter that help
you troubleshoot and document your network.
• Applications: contains additional applications (if
installed), such as VoIP and Security.
To Next Page
Loading...
