Fluke NetTool II Series User Manual

4
Power Supply
To supply power to your tester, you can use batteries,
the optional AC Adapter, or PoE.
Using the Batteries and AC Adapter
The tester uses four alkaline batteries (supplied) or
four rechargeable NiMH batteries (optional).
To install the batteries, remove the yellow boot to
access the battery compartment. Open the door and
insert the batteries, as shown in the following
illustration:
1
2
ekd01f.eps

Fluke NetTool II Series Specifications

General

Brand	Fluke
Model	NetTool II Series
Category	Test Equipment
Language	English