Fluke Performance Series - Range

Performance Series Thermal Imagers
Menus
23
Range
Range (level and span) is set to automatically adjust or is set for manual
adjustment. To choose between automatic or manual level and span, do the
following:
1. Push .
2. Push / to highlight Measurement.
3. Push  or  to view the menu.
4. Push / to highlight Range.
5. Push  or  to view the menu.
6. Push / to toggle between the Auto and Manual ranging.
7. Push  to set.
8. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com