Fluke Performance Series - Spot Temperatures

Performance Series Thermal Imagers
Menus
31
Spot Temperatures
The Spot Temperatures are floating HI and LO temperature indicators that
move on the display as the temperature measurements of the image fluctuate.
To turn on/off the hot and cold spot indicators:
1. Push .
2. Push / to highlight Measurement.
3. Push  or  to view the menu.
4. Push / to highlight Spot Temp.
5. Push  or  to view the menu.
6. Push / to toggle this function ON or OFF.
7. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
Note
If the Display is set to Display All, you see the information about
current transmission correction as τ = xxx%.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com