Fluke Performance Series - Set Low-Temperature;Dew Point Color Alarm; Outside;Inside Alarm

Performance Series Thermal Imagers
Menus
39
Set Low-Temperature/Dew Point Color Alarm
To set a low-temperature/dew point color alarm:
1. From the Color Alarm menu, push / to highlight Set Low
Alarm.
2. Push  to open the Color Alarm menu.
3. Push / to adjust the temperature setting.
4. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
Outside/Inside Alarm
If you set values for the high-temperature color alarm and a low-temperature
color alarm, the Imager will have the options for inside or outside isotherm color
alarms.
To set an outside/inside isotherm color alarm:
1. From the Color Alarm menu, push / to highlight Outside or
Inside.
2. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com