Fluke Performance Series - User-Definable Spot Markers

Ti90, Ti95, Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
Users Manual
32
User-Definable Spot Markers
Up to three adjustable, fixed-temperature spot markers are available on the
display. You can use these markers to highlight a region before you save the
image. The marker selection is set as All Off, One Marker, Two Markers, or
Three Markers.
To set a Marker:
1. Push .
2. Push / to highlight Measurement.
3. Push  or  to view the menu.
4. Push / to highlight Markers.
5. Push  or  to view the menu.
6. Push the / to highlight the function between All OFF, One
Marker, Two Markers, and Three Markers.
7. Push  or  to set the marker option and go to the “Move Marker”
display. You will see the Move Marker icon and the labels on the function
buttons change to Done, Next, and Cancel.
To change the Marker position on the display:
1. Push     to move the Marker location on the image.
2. Push  to highlight the next marker. Do Step 1 again.
3. Do Step 2 for a third marker.
4. Push  when done.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com