Fluke Performance Series - Camera Menu; Compass

Performance Series Thermal Imagers
Menus
41
Camera Menu
The Camera menu has controls and options for secondary camera features
such as Compass, Video, Laser Pointer, Torch, and Backlight level.
Compass
The Imager includes an eight-point cardinal compass on the display. The
compass has on and off functions. This compass lets you accurately record the
direction the camera is pointing for analysis and reports.
To set the compass:
1. Push .
2. Push / to highlight Camera.
3. Push  or  to view the menu.
4. Push / to highlight Compass.
5. Push  or  to view the menu.
6. Push / to highlight ON or OFF.
7. Push  to set the option.
8. Push:
•  to go back to the live view.
•  or  to go back to the previous menu.
•  to cancel the change and go back to the live view.
Note
 shows on the display when the compass cannot make a reading.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com