Electrical Tester
Safety Information
3
Table 1 is a list of symbols used on the Product and in this document.
Table 1. Symbols
Symbol Description
W
WARNING. RISK OF DANGER.
X
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
Consult user documentation.
FieldSense Measurement: Fluke voltage/current sensing technique.
T
Double Insulated
,
Application around and removal from uninsulated hazardous live conductors is permitted.
Earth
Both direct and alternating current
Battery
Measurement Category II is applicable to test and measuring circuits connected directly to utilization points
(socket outlets and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the
building’s low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
P
Conforms to European Union directives.
)
Certified by CSA Group to North American safety standards.
Conforms to relevant South Korean EMC standards.
Conforms to relevant Australian EMC standards.
~
This product complies with the WEEE Directive marking requirements. The affixed label indicates that you
must not discard this electrical/electronic product in domestic household waste. Product Category: With
reference to the equipment types in the WEEE Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do not dispose of this product as unsorted municipal waste.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
