Fluke TiS20+ - Image Deletion Procedures; Deleting Single or Multiple Images

Thermal Imager
Memory Menu (Memory Gallery)
29
Add a Note to Multiple Images
To add a note to multiple images at the same time:
1. Select m > > Add a Note to Multiple Images.
The display returns to the memory gallery.
2. Tap an image to select it. Tap an image again to clear the selection.
The border and filename text color change to yellow.
3. Repeat for each additional image.
4. Tap Add Note.
A keyboard opens on the display.
5. Use the keyboard to enter a message.
6. Tap Save.
Delete Images
To delete images, do the corresponding procedure below.
Delete an Image
To delete only one image:
1. Open an image in fullscreen mode.
2. Tap T. If needed, tap first.
3. Tap Delete.
Delete Multiple Images
To delete multiple images at the same time:
1. Select m > > Delete Multiple Images.
The display returns to the memory gallery.
2. Tap an image to select it. Tap an image again to clear the selection.
The border and filename text color change to yellow.
3. Repeat for each additional image.
4. Tap Delete Images.
5. Tap Delete.