Fluke TiS20+ - Image Management Tools; Deleting All Images from Device; Flagging Images for Review; Managing Asset ID Tags for Images

TiS20+
Users Manual
30
Delete All Images
To delete all of the images at the same time:
1. Select m > > Delete All Images.
2. Tap Delete.
Flag an Image
Flag an image to review later. The flag feature is a toggle switch.
To flag an image, open an image in fullscreen mode, and tap H. The flag icon changes to .
Tap again to remove the flag.
Asset ID
Use the memory gallery toolbar to add or remove an asset ID from an image that is saved in
memory. See Asset Identification (Asset ID).
To add an asset ID to an image:
1. Open an image in fullscreen mode.
2. Tap D.
3. Assign an asset ID. See Asset Identification (Asset ID).
To remove an asset ID from an image:
1. Open an image in fullscreen mode.
2. Tap the asset ID that looks like on the display.
3. Tap Remove.
The display returns to the image in fullscreen mode, and the asset ID does not show on the
display.