The tilt of the payload can be controlled with the rotary lever situated on the left side of the remote
control. For clarity, the payload tilt angle is displayed on the left side of the tablet's screen during flight.
The switch on the left side of the remote control will allow you to set the payload tilt angle.
FN BUTTON
Press and hold this button to use the secondary functions of other buttons.
EV | LIGHT POWER
- Default: Increases or decreases the EV of the camera.
- While the function (FN) button is pressed, it increases or decreases the onboard lighting intensity.
DUST LIGHT | OBLIQUE LIGHT
- Default: Enable or disable the dust proof light.
- While the FN) button is pressed: cycles oblique lighting (left, right) or both LED panels.
FLIGHT MODE SWITCH
This 3-way switch selects the flight mode of the drone.
POI BUTTON
Press to take a 12MP still image. This will also create a Point Of Interest (POI), which can be reviewed after
the flight in the Flyability Inspector software. Please note that you can take a maximum of 40 POI per
flight.
SRC BUTTON
Switches the video feed between the 4K optical camera and thermal camera. Both cameras will
continue to record continuously, regardless of the feed setting.
ATTI / SPORT
When pressed once and kept pressed, the drone disables the vision and distance sensors and enters
ATTI mode. In this state, the ELIOS 3 is stabilized only by the IMUs accelerometers and gyroscopes. Press
twice and hold to enter SPORT mode. This is similar to ATTI mode, but increases responsiveness and
airspeed.
AUX BUTTON
This button is used to calibrate the RC.
To Next Page
Loading...
