8. Charging
8.1. Charging GCS
To charge the controller, connect the controller charger to the barrel jack of the controller. Plug the other end
of the charger to the wall socket. Use only the provided charger to charge the Controller. The use of a
non-approved charger may result in battery damage and risk of fire. While the controller can be charged while
piloting the drone, this is not a recommended practice, since this may lead to the unit overheating.
How would you know that the RC is charged? The 4 LEDS lights are white, indicating that the RC is charged.
Figure 8.1: GCS charging
To Next Page
Loading...
