CAMERA PARAMETERS
The following key camera parameters are displayed in this area:
- The image quality used for the current recording.
- Remaining memory
- ISO, shutter speed, and EV. The EV can be modified via a dedicated switch on the controller, which
automatically changes the ISO and shutter speed accordingly.
The cameras on board the drone begin recording video as soon as the arming sequence is performed. An
indicator on-screen shows a timer in red and a recording symbol. The time shown corresponds to the aircraft
video recorder. Optionally, the tablet also records a backup video for immediate review and backup purposes.
You can view the backup videos in Device Storage/Flyability/Cockpit/Recordings.
LIGHTING PARAMETERS AND FRONTAL DISTANCE MEASUREMENT
The LED lights display the status of the power level of the lighting system and which panels are lit.
Note that you cannot set the LEDs to full power until the aircraft takes off. This is because the heat generated by
the LEDs needs to be cooled down by the propellers’ airflow.
The frontal distance is measured by a sensor mounted next to the camera and displayed over the lighting
parameter display. The units can be changed in the settings menu.
CONTROL MODE
Depending on the situation and the pilot’s wishes, the aircraft can be in different flight modes, which can affect
control and stability. Please refer to the aircraft user manual to learn more.
To Next Page
Loading...
