11.1.2 Defining starting point parameters:
Defining name:
As MotoMo nitor does not have a keyboard, user has to use next/previous buttons to set the name. Select
Point name option in menu and then confirm, by clicking „Set”.
Then you can edit the starting point name. The letter you are currently editing is flashing.
You can select letters (a-z) and digits (0-9) by pushing buttons:
- top left (Change -) to go down the alphabet/digits,
- bottom left (Change +) to go up the alphabet/digits,
- top right (Next Char.): to switch to next character in start point name or save the name,
- bottom right (Back): to switch to previous character in the name or cancel the name editing (when we are
at first character),
Once the name is confirmed, we can edit other characteristics:
- Latitude,
- Longtitude,
- Area - radius around current starting point - between 500 and 5000 meters.
You can define up to 25 starting points.
To exit the menu, press bottom right button - Back.
12. WING NAME SHORTCUT
In this menu we can submit our wing short name with a restriction to 5 characters.
To set the name, use following buttons:
- top left (Change -) to go down the alphabet/digits,
- bottom left (Change +) to go up the alphabet/digits,
- top right (Next Char.): to switch to next character in start point name or save the name,
- bottom right (Back): to switch to previous character in the name or cancel the name editing (when we are
at first character),
Once all characters are set, top right button will change it's label to "Save". Press this button to confirm the
name and go back to main menu.
First letter of the name is always capital.
FLYelectronics All Rights Reserved Page 12
To Next Page
Loading...