9. DEVICE CONFIGURATION
To enter the "Settings" menu, press both left hand side buttons. Hold until the requested menu shows on
screen. Inside menu, particular button is described in blue square next to it.
Once inside the menu, navigate using buttons by which you see labels "Next" and "Previous". To enter
particular setting, place an arrow next to it, and press button labeled as "ENTER".
10. FLYING LOGBOOK
In this menu you can see the flights log book. Each log consist of following information: ordinal, flight date
and time, starting point, wing shortname and duration of flight.
Total flights duration can be found in right top corner.
To navigate Flying Logbook menu:
use top left button "Next Page" to see further flights,
use bottom left button "Prev. Page" to see previous flights.
To exit Flying LogBook and return to Settings menu, press bottom right button - "Back".
11. STARTING POINTS
To navigate Starting Points menu, use Up and Down buttons.
11.1.1 Adding new starting point.
To define new starting point, navigate to position Add New Start Point and press ENTER.
You will be asked to assign 4 characteristics of new starting point:
a) Name
b) Latitude,
c) Longitude,
d) Starting area - radius around the given point, which will be treated as start point terrain,
It is easier to add new starting point when we are on it. If MotoMonitor finds GPS signal
while adding new starting point, it will automatically suggest current coordinates as start
point characteristics.
FLYelectronics All Rights Reserved Page 11
To Next Page
Loading...