FLYelectronics MotoMonitor - Manual Time and Date Setting; Speed Unit Selection; Altitude Unit Selection

14.1.4 Set time and date
This setting allow user to manually set the date and current time.
When entered, we have to set up:
Set hour
Set minutes
Set day
Set month
Set year
To navigate between above values, use right hand side buttons (top for Next and bottom for Back).
When editing the year, top right button will change from Next to Save. This allows user to save current
progress and setup date/time.
14.1.5 Set speed units
This setting allows you to set the speed unit. All parameters linked with speed will be displayed in one of following
units:
- km/h (kilometers per hour)
- mph (miles per hour)
- knots
14.1.6 Set altitude units
This setting allows you to set the altitude unit. All parameters linked with altitude will be displayed in one of
following units:
m – meters
FT – feet
FLYelectronics All Rights Reserved Page 16