FLYelectronics MotoMonitor - Time, Date, and Units Settings; Timezone Selection; Automatic Date Setup via GPS

Use following buttons:
Next (top left) – next option,
Previous (bottom left) – previous option,
Save (top right) – save settings,
Back (bottom right) – exit,
14. TIME AND DATE, UNITS
Use left hand side buttons (Next/Previous) to navigate in the menu. Confirm selection with top right button
- Set, use bottom right button Back to exit the menu.
14.1.1 Timezone (selecting current timezone)
Using top left button (+1) we add hours to adjust the device to our timezone. Bottom left button (-1) is
used to deduct the hours. To confirm the changes - press top right button (Save), to cancel - bottom right
button (Back).
14.1.2 Include the summer time ( setting daylight savings time)
Following correct timezone setting, we can choose if our device should take into account daylight saving
time changes, happening twice a year in most countries.
Navigate using keys:
Yes (top left) – turn DST on,
No (bottom left) – turn DST off,
Save (top right) – save current status,
Back (bottom right) – cancel changes and exit,
14.1.3 Automatic date setup using GPS signal
We can set MotoMonitor to use current date automatically, using GPS signal.
Use following keys :
Yes (top left) – turn automatic time setting on,
No (bottom left) – turn automatic time setting off,
Save (top right) – save current status,
Back (bottom right) – cancel changes and exit,
FLYelectronics All Rights Reserved Page 15