FLYelectronics MotoMonitor - Introduction; Contents; Before First Launch

2. INTRODUCTION
Thank you for choosing FLYelectronics and purchasing our MotoMonitor. We are sure you made the
right choice and will strive to convince you about it, should you still have any doubts.
Additionally, we would like to thank you on behalf of all customers – as your purchase allows us to develop
this device further and add new features to it.
3. CONTENTS
Complete MotoMonitor set consist of:
- transmitter
- receiver
- probe connector
- charger
- micro-USB cable
- lanyard
- universal CHT probe (or one dedicated to your engine)
- universal 4mm EGT probe (or one dedicated to your engine)
- harness mount
- RPM measurement wire
- chassis ground wire
- manual/warranty card
- “quick start” guide
- transmitter protection
- Velcro
4. BEFORE FIRST LAUNCH
Before launching the device for the first time, follow below steps:
a) Check if contents are in line with what is described in paragraph 3,
b) Check if the warranty card is filled in,
c) Charge the receiver,
d) Charge the transmitter,
FLYelectronics All Rights Reserved Page 5