Flyer Mountain - Auto Mode Menu; Elevation Calibration Menu; Enviolo TR Automatiq Integrated

14
5.5.15 Auto mode menu
In the auto mode menu, you can change the po
-
sition of the auto mode when selecting the as-
sistance levels.
Sequence when “Position 1” is selected:
High
Std
Eco
Auto
O󰀨
Sequence when “Position 2” is selected:
High
Auto
Std
Eco
O󰀨
5.5.16 Elevation calibration menu
You can correct the actual elevation in the eleva
-
tion calibration menu. Move the joystick up and
down to change the numbers. Move the joystick
left and right to switch between numbers.
Press the joystick to apply the new settings after
conrmation.
5.5.17 enviolo TR automatiQ integrated
If your FLYER e-bike has an “enviolo TR automa
-
tiQ integrated” gear hub, the hub may need to be
recalibrated.This is the case if you suspect that
you are not getting the full transmission range.
In the settings menu, select the “Calibrate envio
-
lo” submenu by clicking the OK button.
Now press the OK button again to start the ca-
libration.
The system can only calibrate successfully if you
pedal lightly or with no force throughout the pro
-
cess.Aconrmationmessagewillappearonthe
display if the calibration has been successful.
enviolo TR automatiQ integrated