Flyer Mountain - FLYER AG Manufacturers Warranty; G Eneral Warranty; General Dealers Warranty; Wearing Parts

75
EN
• When transporting the e-bike by car,
the battery must be removed and
transported separately. Make sure
that the battery contacts are safe from
short circuiting.
Public transport
Obtain information regarding the local regulations
when you intend to transport your e-bike on public
transportation.
Aircraft
Obtain information regarding the legal guidelines
if you intend to transport your FLYER by aircraft.
Ask your airline.
22. Wearing parts
Your FLYER is a technical product and therefore
requires regular inspection.
Many parts of your FLYER are subject to very
rapid wear, depending on their function and the
extentofusage.
This includes:
• Tyres
• Brake pads
• Brake discs
• Bicycle chain or drive belt
• Chain wheels, sprockets, jockey wheels
• Lighting system
• Handlebar grips
• Lubricants
• Gear and brake cables
• Bearings
• Suspension elements
Have your FLYER regularly inspected in
a FLYER specialised workshop and
have wearing parts replaced as re
-
quired. Regular visual inspection for
cracks, scratches and damage to com
-
ponents is the responsibility of the rider.
As is the case with all mechanical com-
ponents, the bicycle is subject to wear
and tear and high stress. Depending on
the degree of stress imposed on them,
di󰀨erent materials and parts may react
di󰀨erentlyintermsofwearandfatigue.A
part may suddenly fail and cause injuries
to the rider when its intended service life
isexceeded.
Any kind of cracks, scratches or colour
changes in high-stress areas are an in
-
dicator that the service life of the com-
ponent has been exceeded and that it
should be replaced.
23. Generalwarranty
23.1 Generaldealer’swarranty
End customers shall be entitled to exercise the
standard warranty claims against the FLYER
dealer (depending upon the agreement or ap
-
plicable law; as a rule two years after delivery).
For the battery, a residual capacity of 60 % of
the original rated capacity after two years or 500
full charging cycles is guaranteed, provided that
the battery has been operated and charged in
accordance with the operating instructions. Nor
-
mal wear and tear is generally not covered by the
warranty. The end customer shall be responsible
for ensuring that the FLYER e-bike is regularly
maintained and cared for (including the conduct
of all inspections according to the operating in
-
structions).Warrantyclaimsshallalsobeexclud-
edintheeventthattheFLYERe-bikeismodied
or repaired independently or used other than for
its intended purpose: racing and competition,
commercial usage, overloading, and other use
thatdoesnotreecttheintendedpurpose.
The warranty period for used bicycles from
FLYER dealers (second-hand bicycles) shall start
fromthedateofpurchasebytherstbuyer.
23.2 FLYERAGmanufacturer’s
warranty
a. Warranties
Independently of the warranty rights towards
FLYER dealers, FLYER AG provides the following
warranty services to the end customer voluntarily
from the date of purchase for new, fully assembled
FLYERe-bikesforwhichnalassemblyandcali
-
bration are carried out by a FLYER dealer recog-
nised by FLYER AG:
FLYERPluswarranty
Frame: Five years for frame failure;
Motor, motor control unit, display, charger: gener
-
ally two years for manufacturing defects and faulty
materials;
Two years for the battery (residual capacity of at
least 60 % after two years or 500 full charging cy
-
cles,dependingonwhatisreachedrst;provided
that the battery has been operated and charged in
accordance with the operating instructions).
FLYERPremiumwarrantyafterregistration*
Frame: Five years for frame failure;
Four years or 12,000 km (depending on what is
reachedrst)forcomponentsandelectronics;
Four years for the battery (residual capacity of at
least 60 % after four years or 1000 full charging cy
-
cles,dependingonwhatisreachedrst;provided