Flyer UPROC - Inspection plan; First 200 km;4 months Checks; Before Each Ride Checks; After Each Ride Checks

47
EN
Beforeeachride–FLYERdriver
• Check the correct position of the bell
• Check the function of the brakes
• Check the function of the gear system
• Check the function and correct setting of sus
-
pension elements
•
Are all quick release fasteners, quick release
axles,screwsandnutscompletelyclosedand
fastened?
• Check that the tyre pressure is correct
• Check the wheels for true running and dam
-
age as well as safe attachment and correct
fastening
•
Check that the handlebars, stem, seat post
and seat are safely attached and correctly po-
sitioned
•
Check the battery’s charge status
• Check that the battery is correctly and securely
attached.
Aftereachride–FLYERdriver
• Cleaning the FLYER e-bike
• Visual inspection of the frame and of
components for cracks and damage
•
Check the tyres for damage, wear, brittleness,
alienobjectsandsu󰀩cientproledepth
• Check the rims for wear and true running
• Check the tension of the spokes
• Clean the chain and sprockets as required
and lubricate them with a suitable chain oil ap
-
proved by the manufacturer
•
If necessary, clean the brake discs with a suita-
ble brake cleaner approved by the manufacturer
•
Clean all bearings as required and lubricate
them with suitable lubricant approved by the
manufacturer
• Clean suspension elements as required and
lubricate them with original lubricant approved
by the suspension manufacturer
• Clean all moving parts for which lubrication is
intended (especially quick release fasteners,
quickreleaseaxlesandthejoints)asrequired
and lubricate them with a suitable lubricant ap
-
proved by the manufacturer
Allow your FL
YER specialist retailer to instruct
you.
Afterridinginrain,snoworwetconditions
(in addition to the points under “After each ride”)
FLYERdriver
• Clean the chain and lubricate it with a suitable
lubricant approved by the manufacturer
• Clean the brake
• Clean the gear system
• Check the su󰀩cient lubrication of all compo
-
nents
Allow your FL
YER specialist retailer to instruct
you.
This includes:
• Tyres
• Brake pads
• Brake discs
• Bicycle chains
• Chain wheels, sprockets, jockey wheels
• Handlebar grips
• Gear and brake cables
• Bearings
• Suspension elements
Have your FLYER regularly inspected in
a FLYER specialised workshop and
have wearing parts changed as re-
quired. Regular visual inspection for
cracks,
scratches and damage to com-
ponents is the responsibility of the driver.
The bicycle is subject to wear and high
stress as are all other mechanical com-
ponents. Depending on the degree of
stress
imposedonthem,di󰀨erentmate-
rials
 and parts may react di󰀨erently in
terms of wear and fatigue. A part may
suddenly fail and cause injuries to the
driver when its designed service life is
exceeded.Anykindofcracks,scratches
or colour changes in high-stress areas
are an indicator that the service life of
thecomponenthasbeenexceededand
that it should be replaced.
23. Inspection plan
Aftertherst200riddenkilometres
orafter4months:
FLYER specialist retailer
• Checkthermattachmentofallscrews,nuts
and quick release fasteners
• Check the wheels and centre them as required
• Check the tyres
• Check the fastening torque on all parts
• Adjust the headset
• Check the brake and shifter cables
• Check the gear system and adjust if necessary
• Check the brakes, adjust if necessary
• Check the suspension elements, adjust if nec
-
essary
•
Su󰀩cientlubricationofallcomponents
•
FLYERdriver
Duringyoure-bike’srst
inspection by the FLYER specialist retailer, ask
themtoexplainthecorrectprocessesforclean
-
ing and oiling the chain after rain and checking
components for function or damage.