Adding one dial plan:
Step 1.Open Phone/Dial Plan webpage
Step 2.Add one dial plan, user can refer to 7.7.3 Dial Plan
Using dial plan to make call:
Dial the phone number according to one dial plan.
Add the hot line from SIP Account/Line1/2 webpage, Supplementary Service Subscription column, below is one example:
Step 1.Open SIP Account/Account1/2 webpage, Supplementary Service Subscription column
Step 2.Fill in the hot line number, user can also add the delayed time.
Example 1: set the hot line number is 511.
Example 2: set the hot line number is 511 and delayed time is 4 seconds.
5.2.8 Answering a Telephone Call
When a call is incoming, the associated line button will flash and the phone will ring.
You can receive the call by:
Step 1.Pressing the corresponding line button or
Step 2.Pressing the speakerphone, or
Step 3.Lifting the handset, or
Step 4.Using the headset, or
Step 5.Auto-answer: if auto-answer is enabled, IP622 will answer the phone automatically when there is a call incoming
Enable auto-answer: press MENU button to access to the menu items, then use the up and down button to choose 6Reference, set