Flying Voice Technology ip622 - No Voice During an Active Call; Can Not Connect to the Configuration Website; Forget the Password

Page
63
of
70
Check the status of your SIP registration status, or contact your administrator, supplier, or ITSP for more information or assistance.
8.6 No Voice during an Active Call
Solution:
Check if the servers support the current audio codec type, or contact your administrator, supplier, or ITSP for more information or assistance.
8.7 Can not connect to the configuration Website
Solution:
Check if the Ethernet cable is properly connected.
Check if the URL is right wrote, the format of URL is: http:// the Internet port IP address.
Check if your firewall/NAT settings are correct.
Check if the version of IE is IE8, or use other browser such as Firefox or Mozilla, or contact your administrator, supplier, or ITSP for more
information or assistance.
8.8 Forget the Password
Default password of website and menu is admin.
If user changed the password and then forgot, you can not access to the configuration website or the menu items which need password.
Solution:
Factory default: press Menu button and choose 16Factory Default, then a notice will appear, choose OK by using the corresponding softkey